Toyota Celica Supra Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
712 Posts
As a totally opposite thought, when I did my clutch, after putting the tranny back up the clutch would not work properly. It turns out that the release fork had come off of the bearing inside the tranny somehow (those clips are not very tight). Try to move the end of the fork by hand and see if it is loose. Just a thought...


-Ken
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top