[MNMk2]

I've got my head at the head shop currently and am looking to replace all my coolant hoses on the vehicle since one blew last summer and left me in this position. The only ones I've been able to find actual replacements for are upper and lower radiator hoses. Does anyone know of compatible preformed hoses from other vehicles or a vendor who would sell the correct hoses (I'm not hopeful on that last option)? I'm fine using bulk hose but would much rather have some nice preformed hoses for some of the trickier bends. Thanks in advance guys.

 

[AJ]

MNMk2 what yr Supra ??

Second these are my best guess for after market replacement, you will need to confirm fitment as well...

Gates 18426 hose under intake plenum

Dayco 87625 heater valve to block?

Gates 18738 heater valve to core?

Continental Elite 63155 heater valve to cylinder head

Dayco 80422

Pipe to connector heater hose near valve

 

[AJ]

And there are 2 coolant lines on the Throttle body and 1 underneath going to the block

 

[AJ]

See 16268A , 16267-43010 Hose(For Water By-Pass Pipe)

Aftermarket replacement Gates 18426 hose under intake plenum


Pic for reference

 

[AJ]

Again pic for reference

 

[supraev]

You guys are amazing and helpful!

 

[AJ]

Check RockAuto as well...click on CELICA then 2.8 NOT CELICA SUPRA

1985 TOYOTA CELICA 2.8L L6 Heater Hose | RockAuto

RockAuto ships auto parts and body parts from over 300 manufacturers to customers' doors worldwide, all at warehouse prices. Easy to use parts catalog.

www.rockauto.com

 

[MNMk2]

Thanks AJ! It's an 82. That is all very helpful.

 

[Camsdad66]

You guys are amazing and helpful!

Yes, this is one of the best forums out there. These guys (and ladies) are AWESOME! Always get an answer, and it's a good one! I would never have gotten my '83 running without them! Great source of knowledge and talent you can't get from a book or anywhere else!

Sent from my SM-A505U using Tapatalk