Toyota Celica Supra Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
1,374 Posts
Discussion Starter #1
I'm in the process of installing an aftermarket alarm, Viper 850. My stock alarm never seemed to work. Opened the hatch once and heard the alarm clicking but no horn nor lights.

Can the stock alarm be disabled simply by pulling the harness from the alarm computer or will doing this affect the operation of other components? If pulling the harness is not the answer, what wire(s) can be pulled to disable the computer? Thanks for the help!

You can't hide a piece of broccoli in a glass of milk.
Scott
 

·
Registered
Joined
·
257 Posts
I just unplugged the relay thats behind the armrest in the left rear seat area( under the quarter window) and everything else works fine.
Brian
 

·
Registered
Joined
·
207 Posts
gonna make an attempt to install an alarm today...so i just wanted to confirm that the above is the correct procedure to disable the stock alarm. lmk. thanks.

skip
 

·
Registered
Joined
·
3,937 Posts
S,

I'm not an admin or anything close to that.
But Don't Triple Post! :shock:

Good to hear you figured it out though.

Ken
 
1 - 6 of 6 Posts
Top