I know that we all would like to be able to replace the drivers side wiper with just a quick cartridge change. The stock wiper won't do that so unless you change the arms with Celica arms what options do you have. I want to keep the original style but be able to replace them with cartridges so I modified my drivers arm to take an adapter for wiper cartridges. Here is what I did. Took about 20 minutes.
I tried it with a spare arm I had. I had these adapters already but I believe the are Bosch adapters.
I found these on Amazon.
With the wiper blade and blade arm removed you can see the other side to rivet B. You will need to remove rivet B now.
With the rivet B now removed you can take off one side of the channel off.
This leaves the other channel side. This will need to be ground off too.
It has now been groung off to be even with the bottom of the channel.
As you can see the adapter holes match the spacing of the holes on you wiper arm. They will need to be drilled out so a 1/8 inch pop rivet will fit.
You can rivet or bolt on the adapter either on top or underneath the arm. If you choose to do it on top I suggest grinding of the bottom of the adapter side to be flush. This will allow better mating to the wiper arm. ( It is what I did)
The second adapter mounts directly to the passenger wiper arm so no need to modify it.