Toyota Celica Supra Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
830 Posts
Discussion Starter #1
ok heres the deal.....i put an 83 engine in my 86. the wires from the engine to the computer hook up fine ( i used the 83 ecu). BUT the one connector from the engine to the car connector (not the ecu) dosn't hook up because they're different style connectors. so we spliced some wires and hooked them up cuz the connectors are different. what i think is that my cold start idle isn't working properly cuz of my connections so the engine just idles at 600 rpm when its still really cold. NOW my engine seems to be missing whens its cold and the thing is so gutless. so i'm wondering if the cold start idle has anything to do with the engine missing. BTW i replaced the plugs and checked all my wires and stuff so i know its not that. thx
 

·
Registered
Joined
·
216 Posts
I know I may not be of any help, but if you have some 86 wiring, ecu, intake manifold with all sensors (TPS...etc) woudl you be willing to get rid of it all?
 

·
Registered
Joined
·
830 Posts
Discussion Starter #3
sorry the engine we pulled from my 86 was an 84 engine not an 86.
 
1 - 3 of 3 Posts
Top