If the two kits together contain every gasket needed, which I believe is what he was looking for, what other gaskets will he need, for the engine? Quoted from his original post "2. is there a gasket set for the 5mge?" I didn't notice where he wanted to rebuild...
The head kit (hs8969pt2) contains (going by memory) the head gasket, valve cover gaskets, valve cover grommets, cam seals (rear), cam seals (front), Cam tower gaskets, both intake gaskets, exhaust manifold gasket, tstat gasket, a large rectangle shaped egr gasket, the metal "O" gasket under the rectangled shaped egr, valve seals, gasket for the water tube that runs around the engine and to the water pump, the small egr gasket, rear main seal, gasket for the rear main seal cover, a gasket between the head and the tstat housing, the 2 exhaust gaskets from the manifold to the "down"pipe, the gasket between the upper (metal) timing cover and the head, and a few other gaskets that I haven't gotten to yet.
The conversion kit (cs8969) I believe comes with the lower timing cover gaskets (between the timing cover and the block), the water pump gasket, the front main seal, oil pan gasket, the seal between the plastic timing cover and the metal one. I'm not positive about this kit. I will know more tonight after I pick it up.
After I get home I will repost this with all the components from both kits.
Now if he wants to totally rebuild the engine that is definitely a different story...