Toyota Celica Supra Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
302 Posts
Discussion Starter #1 (Edited)
Name: Raymond Fong
Location: SF Bay Area
Cell #: 510-390-0726
Email: [email protected]
Pm: Yes, but I respond quicker to emails


USDM 4AGZE motor setup for AE86 $1650obo
• Machined by Hasselgren, assembled at home; less than 2000 miles on the rebuild. No upgrades, just basic rebuild.
• Modified coolant pipes for RWD install, heater deleted (can be added back pretty easily)
• Modified air inlet elbow for RWD
• Modified supercharger outlet for RWD
• FMIC with all aluminum piping
• AFM w/AW11 airbox and custom piping
• Modified GZE/AE86 yellow ECU plug harness (used when motor was running in the car, but I unloomed it to redo it nicer. All still intact, but might be missing some plugs from the start. Never finished it.)
• Unmodified AE92 GZE grey ECU plug harness. Comes with cooling fan computer.
• Yellow plug California spec GZE ECU
• AW11 throttle bracket
• Alternator
• Distributor
• Exhaust manifold and downpipe
• Oil cooler
• Tons of extra spare parts

Motor came with the car, but was not installed at the time. It had been running in the car previously, but was pulled back out to fix some work quality issues (messy wiring mostly). I know the previous owner well, so if more information is needed I can get it. I’m somewhat firm on the price, but shoot me an offer anyways.

Other used parts
• T50 transmission – no grinds that I know of SOLD
• Illegal Garage clutch – barely used $300
• GTS flywheel – used by clean $100
• GTS starter $50

All prices on these parts are OBO. I’ll have more parts as I dig them out of storage.

http://racetekengineering.com/images/forsale/4agze/IMG_3361.JPG
http://racetekengineering.com/images/forsale/4agze/IMG_3362.JPG
http://racetekengineering.com/images/forsale/4agze/IMG_3363.JPG
http://racetekengineering.com/images/forsale/4agze/IMG_3364.JPG
http://racetekengineering.com/images/forsale/4agze/IMG_3365.JPG
http://racetekengineering.com/images/forsale/4agze/IMG_3366.JPG
http://racetekengineering.com/images/forsale/4agze/IMG_3367.JPG
http://racetekengineering.com/images/forsale/4agze/IMG_3368.JPG
http://racetekengineering.com/images/forsale/4agze/IMG_3369.JPG
http://racetekengineering.com/images/forsale/4agze/IMG_3370.JPG
http://racetekengineering.com/images/forsale/4agze/IMG_3371.JPG
http://racetekengineering.com/images/forsale/4agze/IMG_3372.JPG
http://racetekengineering.com/images/forsale/4agze/IMG_3373.JPG
http://racetekengineering.com/images/forsale/4agze/IMG_3374.JPG
http://racetekengineering.com/images/forsale/4agze/IMG_3375.JPG
http://racetekengineering.com/images/forsale/4agze/IMG_3376.JPG
http://racetekengineering.com/images/forsale/4agze/IMG_3377.JPG
http://racetekengineering.com/images/forsale/4agze/IMG_3378.JPG
http://racetekengineering.com/images/forsale/4agze/IMG_3379.JPG
http://racetekengineering.com/images/forsale/4agze/IMG_3380.JPG
http://racetekengineering.com/images/forsale/4agze/IMG_3381.JPG
http://racetekengineering.com/images/forsale/4agze/IMG_3382.JPG
http://racetekengineering.com/images/forsale/4agze/IMG_3383.JPG
http://racetekengineering.com/images/forsale/4agze/IMG_3384.JPG
 

·
Registered
Joined
·
302 Posts
Discussion Starter #5
Everything is converted to RWD, and was running in a 85 Hachi up until a few months ago. I will have to check on the shipping costs, give me a few days to check on that and get back to you.

Looking into buying this how much to ship to 96740 Hawaii. Is everything converted for rwd.
 
1 - 5 of 5 Posts
Top