Toyota Celica Supra Forum banner
1 - 1 of 3 Posts

· Registered
1,407 Posts
Just put your engine at TDC (align marks on cam gears with rear cover). Note the position of the #1 lead on the dist. cap and mark it on the distributor body. Put the distributor in so that the rotor is pointing at the #1. It will actually point a little bit before #1 so that you have the proper adjustment for advancement (it's very little).


1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.