Toyota Celica Supra Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Hi this is my first time doing a 7m swap into my 86 mk2, I am having trouble finding some plugs like:
3A;
3E;
2A;
2D;
K;
2l;
Any help would be appreciated, thanks.
 

·
Super Moderator
Joined
·
8,525 Posts
They're all the different junction blocks in the footwells and the engine bay. You don't need any of that. Everything you need to inferface with is on the B1, M1, and C1 connectors on the 7M harness. Most of what you need on the MK2 is on the X connector.
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
They're all the different junction blocks in the footwells and the engine bay. You don't need any of that. Everything you need to inferface with is on the B1, M1, and C1 connectors on the 7M harness. Most of what you need on the MK2 is on the X connector.
Thanks, I am not sure which one is the x connector, and what pins should I use from the B1, C1, and M1 onto the X connector?
 
1 - 3 of 3 Posts
Top