Toyota Celica Supra Forum banner
1 - 2 of 2 Posts

·
Administrator
Joined
·
8,863 Posts
Probably the best way to get it out would be to remove the hood and use an easy out of the bolt stub. If there is a stubby sticking out you might be able to use vise grips on it or use a dremel cut off wheel and put a screw slot in the stub. Try pushing down or the latch part and see if the latch will latch. If so you might just need to adjust the hood or latch.
 

·
Administrator
Joined
·
8,863 Posts
Go get an easy out and left hand drill from from the hardware store. Use the left hand drill to drill the hole for the easy out. Many times the screw comes just when you drill the hole. If not pound the easy out in and use that to unscrew it. Just hope that the easy out doesn't break because then you are screwed (no pun intended)
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top