What all is interchangeable within the 7MGTE to the 5M, I am wounding if i can use the rods and or pistons from the 7MGTE for my 5M. I need ure thought, oppinions, opifanies, and any of all that other good stuff.
The 7MGTE rods are slightly longer and the pistons have valve reliefs for the 7M 24-valve head. The two engines share the same basic M-series block design but the internals are not directly interchangeable.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.