Toyota Celica Supra Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
406 Posts
Discussion Starter #1
Hey guys,

My Supra failed inspection AGAIN! =( The allignment is still all out of whack, even with the frame having been pulled straight.

I need to know the actual TOYOTA (not aftermarket books) specs for the wheel allignments please, if anyone has them. The 3 books that they had at the shop its at are all different.

Anyhelp ASAP would be appreciated.

Thanks =)

Aaron
 

·
Registered
Joined
·
177 Posts
as per toyota repair manual 1984
front: toe-in 3+/-4mm inspection standard
3+/-1mm adjustment standard
camber :Inspection standard 50'+/- 45'
Adjustment standard 50'+/- 30'
left-right error 30'
Steering axis inclination:
Inspection standard 10 degrees 10' +/- 45'
adjustment standard 10 degrees 10' +/-30'
Left-right error 30'
Caster:
Inspection standard 4degrees 10'+/- 45'
adjustment standard 4degrees 10'+/- 30'
left-right error 30'
Wheel angle:
inside wheel 37degrees 35'+/- 2'
outside wheel 30degrees 45'(reference)
 
1 - 2 of 2 Posts
Top