[CRF_Rider]

I am in need of an oil line kit for my 5mgte conversion. I checked with Aaron (Rabbid Chimp) and he has been waiting for parts to make them for a while and he doesnt have an ETA on when I would get them.

Does anyone have a different source for them or a used kit? I am trying to get all the parts together so when the block and head come back from the machine shop I can put it all together.

Thanx
Mark

 

[Racefiend]

You could always just get a the stock 7mgte oil setup and modify it if you're in a hurry. It's not that hard. 1/8 NPT Tee for oil sender, weld in bung with screw in 90 elbow pipe for oil pan. Then just cut the drain for 7mgte oil line and run a hose to the pan fitting. Cut off end of oil feed tube and braze a fitting on. Make a hose with fittings to go from Tee to oil feed for turbo.

Christian

 

[CRF_Rider]

Hmm. I need to find some pics of the setup online or find a locat 7mgte I can look at locally. I just wish I could weld or braize.

Thanx for the info.