[Chrisfrom1986]

so where is the temp sending unit located on the 82's? ever since my engine swap, its read wrong all the time using the same cluster. before engine swap, guage was always correct.

 

[Chrisfrom1986]

pics of there areas? i have two plugs that go on top of the t-stat housing. one has a green colored plug, and one is yellow/brown?

 

[Chrisfrom1986]

Correct
Gauge cluster temp sensor under distributor/manifold (single wire- Yellow/green)
Cold start temp sensor thermostat housing (two wire)
EFI temp sensor thermostat housing (two wire)
For a total of 3 temp sensors

what color is the plug of the temp sending wire plz.

 

[Chrisfrom1986]

:neutral: theyre all yellow. i need to know what my single wire RED connector is for =(

 

[Chrisfrom1986]

its not a red WIRE, its a red CONNECTOR.

yellow wire with a red stripe

also id like to know where that other connector sitting there goes. i only have 2 connectors on my thermostat housing. both of these wires just hang underneath the distributor.

[email protected] thanks

 

[Chrisfrom1986]

great, where does the CSI connector go? dammit. my temp gauge works, but it acts like its hotter than it is. i turn the key to acc and it moves to 1/4 the way. is there anyway to see where the red plug goes?