thanks for the bump. I'm currently facing this same issue. I was digging around the reservoir screen with a screw driver and ended up pulling pieces of the clogged screen out. It was brown mixed in with some red in the tank. I also replaced the O-ring at the bottom (using vaseline as lube for the ring) of the reservoir tank and flushed the system with new ATF (dextron II ATF). There aren't any brown stuff anymore (as far as i can see). It doesn't leak at rest but when i put lock it to either side, it whines and starts leaking from the O-ring. I tried to dig out any left over screen and couldn't find anything. is it necessary to have a screen in there?
I also replaced the pressure line and return lines. No leaks from those areas.
I also dismantled the power steering assembly and put it back together in the right order. I didn't replace anything in there aside from the oil seal. I just checked inside there to see if everything is okay.
Looking to buy a 6mge crank pulley/harmonic balancer as mine has cracked where the ac belt is held in. Located in WA but willing to pay shipping for sure. Let me know if you got anything or could help me out in locating one, I cant seem to find one anywhere. Thanks in advance!
what's up gang...? i have been searching for proper hood props. are they available anywhere? the ball joint at the hood end and then the bolt anchors the "factory" eyelet end to the inside of the fender...can't find them anywhere. thank you.
this is a thread of somewhat commonly needed tips and tricks. i will add more to it as i think of them.
CRANK PULLEY BOLT REMOVAL!
best way to remove or tighten that bolt(no nic's on the inside of the block or on the rod, etc..)
step 1: remove the timing belt from the cam gears, then line the...
To help alleviate a lot of misinformation, or at least most of it, I decided I should make a thread for and about the (in)famous 6MGE.
Starting with new newbiest of all newb information, JDM simply stands for Japanese Domestic Market e.g. did not come to the United States. This engine is a very...