Toyota Celica Supra Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
661 Posts
I mounted mine on the firewall behind the plenum. Take the return line from the stock fuel pressure regulator on the fuel rail and run high pressure line to the input of your RRPFR (also put a fuel pressure gauge in this line). Then run a line from the output of your RRFPR to where the stock line used to run (it goes to the hard line connector in the drvers side motor mount).

I will try and get some close up pics for you today.

Mark
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top