Posts by jdk_ii
1 - 2 of 2 Posts
Joined
·
1,928 Posts
Yes, sometime this summer, I will be investigating the mfg rubber spring spacers.
Perfect for Eibach owners who have that permanent squat.
Basically, the same style as stock, but 3/4" to 1" longer.
I made a prototype and installed it on top of the stock cushion
to compensate for the Eibach's drop.
It works, though a bit squeaky, as it's two pieces of rubber.
The main issue is I need to have a mold made. Preferably aluminum
as silicone molds are too much trial and error.
I need to find a shop that can make these at a reasonable price,
which is a bit of a challenge for a one-off piece.
The same applies to the console foam replacement. The primary delay as well.
Perfect for Eibach owners who have that permanent squat.
Basically, the same style as stock, but 3/4" to 1" longer.
I made a prototype and installed it on top of the stock cushion
to compensate for the Eibach's drop.
It works, though a bit squeaky, as it's two pieces of rubber.
The main issue is I need to have a mold made. Preferably aluminum
as silicone molds are too much trial and error.
I need to find a shop that can make these at a reasonable price,
which is a bit of a challenge for a one-off piece.
The same applies to the console foam replacement. The primary delay as well.
1 - 2 of 2 Posts
