Toyota Celica Supra Forum banner
1 - 11 of 11 Posts

· Registered
Joined
·
1,687 Posts
Discussion Starter · #1 ·
I need new gears (not used) because the guy that's going to install the True-Trac refuses to set the pinion without new gears. I need something less than the 4.10's I have (I'm redlining in 4th at the end of the quarter).

Any suggestions?
 

· Registered
Joined
·
962 Posts
you are looking at 600 plus dollars on the dealer price... I have done some price qoute on it from Toyota Dealership and that is with the discount... they are now stocked no more and they are needed to be shipped from JAPAN.
 

· Administrator
Joined
·
8,745 Posts
I'd just find another diff shop that will reuse the R&P. Unless there is something wrong with yours they should be able to reuse them. I believe Jeff priced me a new 3.73 R&P around $500. If you want a 4.10 or 4.30 ratio you can buy new gear sets from Precision gear much cheaper.
 

· Registered
Joined
·
1,666 Posts
Is this the right info when looking for R&Ps and LSD carriers?

Toyota 7.5 (190mm)
Ring Gear Diameter: 7.5
Pinion Shaft Diameter: 1.378"
Ring Gear Bolts: (10) RH Thread 11 X 1.00mm
Pinion Splines: 23
Cover Bolts: 8

Thanks,
 

· Registered
Joined
·
649 Posts
If anybody is interested, I have a brand new 4.10 set to sell cheap. I changed to 3.73 for the 7MGTE conversion. 4.10 is as low a ratio as you can find in the aftermarket.
 

· Registered
Joined
·
649 Posts
Paypal works for me. I don't remember the manufacturer. Got them 3+ years ago through Reider Racing along with the truetrac.

PM me the zip and Iwill figure shipping. It's a bit cheaper to ship if I send them to a biz address.
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top